TrustPoint™

1-Factor PIV, PIV-I and CAC Readers with PKI

1-Factor Contactless Reader with PKI

TrustPoint Contactless Readers interface with industry standard Wiegand-based access control systems, enabling an agency to upgrade existing systems to utilize PIV credentials. These Readers are interoperable with all government issued CAC, PIV or PIV-I credentials that have been equipped with contactless interface (ISO-14443) and a FIPS-201 Card Authentication Certificate.

In less than 2.0 seconds, the Reader performs a PKI Challenge-Response to verify the Card Authentication Key (CAK) over the contactless interface. TrustPoint delivers the most secure form of single factor authentication available per NIST 800-116.


Features
  • On-board Cryptographic Engine with Hardware Acceleration Supports RSA, AES, 3DES and SHA functions
  • Transmits FASC-N in Format Compatible to Access System
  • Durable Polycarbonate Housing
  • Red, Green and Yellow Status Indicator LED’s
  • Reliably reads and verifies PIV Credential CAK at 1.5 Inches within 2.0 Sec.
  • Terminal Block & RJ-45 Connectors
  • Wiegand, RS-485 and Mag Stripe Communication
  • Field configurable
  • Flash Programmable via RS-232 Com Port on back of Reader

 

1-Factor Dual Interface Contact or Contactless Reader with PKI

TrustPoint Dual-Interface Readers integrate with industry standard Wiegand-based access control systems, enabling an agency to upgrade existing systems to utilize PIV credentials. These Readers are interoperable with all government issued CAC, PIV or PIV-I credentials equipped with contact (ISO-7816) or contactless interface (ISO-14443) and a FIPS-201 Card Authentication Certificate.

In less than 2.0 seconds, the Reader performs a PKI Challenge - Response and verifies the Card Authentication Key (CAK) over either interface. Should the contactless antenna on the credential not be functional, the contact interface can be used to verify the CAK. TrustPoint delivers the most secure form of single factor contactless authentication available per NIST 800-116.

Features
  • On-board Cryptographic Engine with Hardware Acceleration Supports RSA, AES, 3DES and SHA functions
  • Includes both ISO-14443 Contactless and ISO 7816 Contact Interface for optional insertion use in event of failed antenna on credential
  • Transmits FASC-N in Format Compatible to Access System
  • Durable Polycarbonate Housing
  • Red, Green and Yellow Status Indicator LED’s
  • Reliably Reads PIV Credentials at 1.5 Inches within 2.0 Sec.
  • Terminal Block & RJ-45 Connectors
  • Wiegand, RS-485 and Mag Stripe Communication
  • Field configurable
  • Flash Programmable via RS-232 Com Port on back of Reader

TrustPoint™

2-Factor PIV, PIV-I and CAC Readers with PKI

2-Factor Contactless Reader with PKI

TrustPoint Contactless Reader interfaces with industry standard Wiegand based access control systems enabling an agency to upgrade existing systems to utilize PIV credentials. Interoperable with all government issued PIV, PIV-I or CAC credentials equipped with contactless interface (ISO-14443) and a FIPS-201 Card Authentication Certificate (CAK). Reader is highly configurable to support integration with any legacy access system.

1-Factor Contactless operation supports Level 2 authentication for access to controlled areas. The optional Pin to panel 2-Factor mode is designed for use in facilities where there is a need for an additional authentication factor (Pin to panel) as utilized in many legacy systems (Note this is not a FIPS-201 or NIST 800-116 compliant solution).

This TrustPoint Reader delivers the most secure form of one factor authentication available per NIST 800-116 and adds the capability to support Pin to panel functionality for a second factor for “SOME PLUS” Authentication.


Features
  • On-board Cryptographic Engine with Hardware Acceleration Supports RSA, AES, 3DES and SHA functions
  • In Contactless Mode, Performs PKI Challenge to the Card Authentication Key (CAK) in less than 2.0 seconds
  • Supports most popular industry Pin to panel formats
  • Transmits FASC-N in Format Compatible to Access System
  • Durable Weatherized Telephone Keypad with LED illumination for Night Use
  • Red, Green and Yellow Status Indicator LED’s
  • Terminal Block & RJ-45 Connectors with Wiegand, RS-485 and Mag Stripe Communication
  • Supports ISO 14443 Standards
  • Field configurable
  • Forward Compatible - Field Flash Programmable via RS-232 Port on Back of Reader
  • on back of Reader

 

2-Factor Contact Reader with PKI

TrustPoint Contact Readers are designed for securing access to High Security Level 3 facilities. TrustPoint is fully interoperable with all PIV, PIV-I and CAC credentials and is configurable to integrate with any PACS.

In 2-Factor mode, the TrustPoint Reader performs a PKI Challenge to verify the PIV Authentication Key (PAK) over the contact interface in less than 1.0 second. TrustPoint delivers the most secure form of two factor authentication available per NIST 800-116 for entry into restricted areas

The Reader can be switched from the panel into 1-Factor mode for PKI Challenge-response to the Card Authentication Key (CAK). This switch speeds throughput by eliminating PIN entry, but decreases the security to Level 2.


Features
  • On-board Cryptographic Module with Hardware Acceleration Supports RSA, AES, 3DES and SHA functions
  • Reader Performs PKI Challenge to the PIV Certificate Key (PAK) in less than 1.0 second after PIN Entry
  • Can be switched between 2-Factor Card + PIN and 1-Factor Card only for Level 2 CAK authentication.
  • Transmits FASC-N in Format Compatible to Access System
  • Vertical Card Slot with Protective Shutter Resists Foreign Objects and Wind Driven Rain
  • LED illuminated Card Slot & Keypad for Night Use
  • Durable Weatherized Telephone Keypad
  • Terminal Block & RJ-45 Connectors with Wiegand, RS-485 and Mag Stripe Communication
  • Supports ISO 7816 & FIPS-201 Standards
  • Field configurable
  • Forward Compatible - Field Flash Programmable via RS-232 Port on Back of Reader

 

2-Factor Contact Reader with PKI

TrustPoint Dual Interface Readers integrate with industry standard Wiegand-based access control systems, enabling an agency to upgrade existing systems to utilize CAC, PIV and PIV-I credentials in higher security installations.

TrustPoint Readers can be configured to operate in either 1-Factor or 2-Factor modes by a control line from the PACS controller.

In the 1-Factor Contactless mode, the Reader performs a PKI challenge-response over the contactless interface for Level 2 security (CAK authentication). In 2-Factor mode, the Reader performs a PKI challenge-response over the contact interface for Level 3 High Security facilities (PAK authentication).

The Reader can be installed with the PKI security function turned off and later enabled to support forward migration to PKI.

Features
  • On-board Cryptographic Engine with Hardware Acceleration Supports RSA, AES, 3DES and SHA functions
  • In Contactless Mode, Performs PKI Challenge to the Card Authentication Key (CAK) in 2.0 seconds
  • In Contact Mode, Performs PKI Challenge to the Personal Certificate Key (PAK) in 1.0 second after PIN Entry
  • Can be switched between 1-Factor Card only and 2-Factor Card + PIN with PKI operation from system controller
  • Transmits FASC-N in Format Compatible to Access System
  • Vertical Card Slot with Protective Shutter Resists Foreign Objects and Wind Driven Rain
  • Durable Weatherized Telephone Keypad
  • LED illuminated Card Slot & Keypad for Night Use
  • Terminal Block & RJ-45 Connectors with Wiegand, RS-485 and Mag Stripe Communication
  • Supports FIPS-201, ISO 7816 and 14443 Standards Forward Compatible - Field Flash Programmable via RS-232 Port on Back of Reader